Summary

In this article, you will learn how to add your company logo to the standard process reports (quote, invoice, order confirmation ,etc.).


More Information

To complete this tutorial you will need your company logo as a picture file. Supported formats are JPEG, GIF or BMP. The logo file can be resized by the software but it is best if you size it using a graphics editing program as you will get better results. Don't make it too large as it will make less area available for the report content.


Instructions

  1. The first step in adding the logo to is to tell the software what logo file you want to use on the reports. Copy your logo file to the \Reports folder used by the software. If you don't know where the \Reports folder is, click File, Preferences. Then click File Locations.
  2. Once the logo file has been added to the \Reports folder we need to tell the software what file to use. From the File menu click Company Information.
  3. Click the Other tab.
  4. Select the Logo Type Large - Process Reports.
  5. Click the down arrow button at the far right and select the logo you want to use. You should see the file you added in step 1. If you don't then the file was probably placed in the wrong folder.

Note:  It is fine if you have images selected for the other Logo Types as well.  You should, however, leave the Watermark section blank. 




  1. Click Save and Close to save the changes and return to the main menu.
  2. Now that the logo has been assigned to the company you can print any of the standard process reports and the logo will appear as shown below



Applies To

  • Solatech Window Covering Software 4.2