Summary

This article will describe how to change the increment of measure on your Leica D3aBT Bluetooth laser. 


Instructions


Changing Unit of Measure

  •          Turn on the laser
  •         Hold the Menu button down until you see the word “unit” appear in the display
  •         Use the “+” OR “-“ buttons to scroll through measurements 
  •         When you see the increment of measurement you want (1/8”), then hold the menu button again until you hear a beep (indicating the your changes have been saved) .  If you cannot find the 1/8” increment, proceed to step 2

 

Resetting the device if you cannot find the correct unit of measurement 

  •        Turn on the laser
  •        Hold down the Menu button until you see the word “unit” appearin the display
  •        Hold down both the Clear/Off button and the “+” button at the sametime for 10 seconds until you hear a beep
  •         Use the “+” or “-“ buttons to scroll through measurements. If you still do not see the 1/8” increment, repeat the process